2018-07-11-2 の履歴(No.2)

履歴一覧
差分を表示
現在との差分を表示
ソースを表示
2018-07-11-2 へ行く。
- 1 (2018-07-11 (水) 13:35:58)
- 2 (2018-07-11 (水) 15:23:22)
学習させた用語とindex†

0	前
1	後ろ
2	左
3	右
4	こんにちは
5	へいshiri
6	おみくじ
7	元気?
↑
プログラム†

↑
本体†

#include <time.h>
#include <SoftwareSerial.h>

#define motorR1   8
#define motorR2   9
#define motorRout 10
#define motorL1   11
#define motorL2   12
#define motorLout 13

SoftwareSerial mySerial(6, 7); // RX, TX
int i;
int phrase_state;
int motor_sec;

void setup() {
 Serial.begin(9600);
 mySerial.begin(9600);
 mySerial.println("?");
 srand(time(NULL));
 pinMode(motorR1, OUTPUT); //信号用ピン
 pinMode(motorR2, OUTPUT); //信号用ピン
 pinMode(motorL1, OUTPUT); //信号用ピン
 pinMode(motorL2, OUTPUT); //信号用ピン
 i = 0;
 phrase_state = 1;
 motor_sec = 3000;
}

//静止
void stop() {
 digitalWrite(motorR1, LOW);
 digitalWrite(motorR2, LOW);
 digitalWrite(motorL1, LOW);
 digitalWrite(motorL2, LOW);
}

//前進
void forward() {
 digitalWrite(motorR1, HIGH);
 digitalWrite(motorR2, LOW);
 digitalWrite(motorL1, HIGH);
 digitalWrite(motorL2, LOW);
}

//後退
void back() {
 digitalWrite(motorR1, LOW);
 digitalWrite(motorR2, HIGH);
 digitalWrite(motorL1, LOW);
 digitalWrite(motorL2, HIGH);
}

void left() {
 digitalWrite(motorR1, HIGH);
 digitalWrite(motorR2, LOW);
 digitalWrite(motorL1, LOW);
 digitalWrite(motorL2, HIGH);
}

void right() {
 digitalWrite(motorR1, LOW);
 digitalWrite(motorR2, HIGH);
 digitalWrite(motorL1, HIGH);
 digitalWrite(motorL2, LOW);
}

void motorCtr(int select, int sec) {
 switch (select) {
   case 0:
     stop();
     break;
   case 1:
     forward();
     break;
   case 2:
     back();
     break;
   case 3:
     left();
     break;
   case 4:
     right();
     break;
 }
 analogWrite(motorRout, 255); //出力値:1~255
 analogWrite(motorLout, 255); //出力値:1~255
 delay(sec);
}

void loop() {
 //i = ++i % 5;
 //motorCtr(i, motor_sec);
 byte x;
 if (Serial.available()) {
   x = Serial.read();
   if (x == 'S') {
     /* motor stops */
     motorCtr(0, motor_sec);
   } else if (x == 'F') {
     /* motor foward */
     motorCtr(1, motor_sec);
   } else if (x == 'B') {
     /* motor back */
     motorCtr(2, motor_sec);
   } else if (x == 'R') {
     /* motor right */
     motorCtr(3, motor_sec);
   } else if (x == 'L') {
     /* motor left */
     motorCtr(4, motor_sec);
   } else if (x == 'G') {
     /* greeting */
     mySerial.print("konnitiwa--\r");
   } else if (x == '') {
     mySerial.print("watashiwashiridewaarimasen");
   } else if (x == '') {
     int omikuzi = rand() % 3;
     switch(omikuzi) {
       case 0:
         mySerial.print("daikitidesu");
         mySerial.print("omedetougozaimasuooataridesu");
         break;
       case 1:
         mySerial.print("kyoudesu");
         mySerial.print("kyouwaunngawaruimitaidesu");
         break;
       case 2:
         mySerial.print("yazawaeikiti");
         delay(1000);
         mySerial.print("gomennnasai");
         break;
     }
     mySerial.print("");
   }
 } else {
   int action = rand() % 5;
   switch (action) {
     case 0:
       mySerial.print("sorosorotukaretana---\r");
       break;
     default:
       motorCtr(random() % 5, 1000);
   }
 }
}